Skip to content

Medical emergency? What to do

Space suit technology can protect workers from heatstroke

3-RXPublished March 7, 20064 min read

Key points

  • The technology used in space suits to protect astronauts carrying out space walks in direct sunlight is now being used to develop protective clothing to safeguard firefighters and steel workers who often work in extremely hot and dangerous conditions.
  • "Through this project, named Safe&Cool, we are developing a special protective material with a built-in cooling system based on the technology developed for the space suits used by astronauts on the International Space Station to prevent them from overheating when exposed to direct sunlight during space walks."
  • "Our objective, through the Safe&Cool project, is to develop a higher quality thermal and moisture management layer for protective clothing that complies with EU directives," adds Agnieszka Kurchewska, from the Polish Institute for Labour Protection, National Research Institute (CIOP-PIB).
  • Conceived within ESA's Technology Transfer Programme, the Safe&Cool system is developed by a consortium of six small and medium-sized enterprises (SMEs) from Italy, Belgium and Poland in cooperation with Italian Grado Zero Espace and CIOP-PIB, and coordinated by D'Appolonia.

The technology used in space suits to protect astronauts carrying out space walks in direct sunlight is now being used to develop protective clothing to safeguard firefighters and steel workers who often work in extremely hot and dangerous conditions.

"The existing protective clothing used while performing physically demanding work in hot conditions can, in many cases, hinder workers' ability to remain cool," explains Stefano Carosio from the Italian company D'Appolonia, Project Manager for the Safe&Cool Project.

"Through this project, named Safe&Cool, we are developing a special protective material with a built-in cooling system based on the technology developed for the space suits used by astronauts on the International Space Station to prevent them from overheating when exposed to direct sunlight during space walks."

In Europe alone, the inability to shed excess heat and moisture through clothing results each year in over 1500 heatstrokes. These can be fatal unless medical help is at hand. Even more common, but less serious, are cases of heat stress. This affects an estimated 50 000 workers each year and increases the risk of injury at work due to loss of concentration. Even at a temperature 21? C workers wearing impermeable protective clothing can suffer heat stress when carrying out hard physical work.

"Our objective, through the Safe&Cool project, is to develop a higher quality thermal and moisture management layer for protective clothing that complies with EU directives," adds Agnieszka Kurchewska, from the Polish Institute for Labour Protection, National Research Institute (CIOP-PIB).

"If used for protective clothing this new material will make the working environment safer and better through reducing the risk of heat stress and heatstrokes for those operating in what can be dangerous and often stressful jobs."

Conceived within ESA's Technology Transfer Programme, the Safe&Cool system is developed by a consortium of six small and medium-sized enterprises (SMEs) from Italy, Belgium and Poland in cooperation with Italian Grado Zero Espace and CIOP-PIB, and coordinated by D'Appolonia.

The cooling apparatus used in the project has been developed by Grado Zero Espace and has already been used successfully in clothing for Formula-1 McLaren mechanics and the Spanish Moto-GP driver, Sete Gibernau. Following a preliminary feasibility and concept validation study supported by ESA's Technology Transfer Programme, the project received financial support from the EC under its CRAFT initiative to reach a pre-competitive stage of development.

The Safe&Cool system makes use of three special technologies. Firstly a special 3D-textile structure is used in the thermal and moisture management layer to replace the interliner and moisture barrier of classical three-layered protective clothing.

The materials used in the special 3D-textile structure are hydrophobic thermal comfort fibres to avoid a wet feeling when in contact with the body, combined with hydrophilic fibres to create suction channels to transport moisture away from the skin.

The second technology is the cooling apparatus derived from astronauts' suits. This enables liquid to be circulated through tubing inserted in cavities in the 3D-textile structure, creating 'blood vessels' for heat removal. A water-binding polymer is the third technology and this will be added either as a coating or in the form of a powder dispersed inside the fabrics.

The polymer will absorb and bind excess moisture migrating through the semi-permeable membrane to maintain the temperature below a threshold controlled by the cooling apparatus. If there is a sudden temperature increase, arising from a burn flashover for example, and the cooling system cannot remove heat fast enough from the body, the polymer will release the liquid accumulated, reproducing the human natural sweating process through evaporative cooling.

"Producing protective suits based on the combination of these three technologies will increase the safety of those carrying out tasks in dangerous environments," says Pierre Brisson, head of ESA's Technology Transfer and Promotion Office. "This is another good example of how advanced technologies and concepts already developed for space - in this case to protect our astronauts - can provide innovative and advantageous solutions for people on Earth."

Although the immediate application for the Safe&Cool innovative thermal management system is to create clothing to protect those working in harsh environments, such as firefighters and steel workers, several other promising applications have been identified by the consortium, including use in sportswear and transportation. The Polish company TAPS, which is part of the consortium, is already testing the industrial viability of inserting the system as heating or conditioning elements inside passenger seats in cars and public transport.

http://www.esa.int

The content on this site is for information only and is not a substitute for professional medical advice, diagnosis or treatment. Drug information pages are an archive and may be out of date: always follow your prescriber, your pharmacist and the current product label. In an emergency, call 911.

Filed underStroke

Keep reading

Stroke

Useful stroke trials left unpublished

An investigation into unpublished stroke research data has revealed that 19.6% of completed clinical trials, which could potentially influence patient care, are not published in full. Researchers writing in BioMed…

3 min read

Trauma

Different strokes help tissue heal

Using simple handheld tools, physical therapist Laurie Eickhoff carefully rubs patient Lisa Maharry's leg to treat her Achilles injury with a new therapy intended to stimulate the body's normal healing process.…

3 min read

When to get help

Reading is for later. These need care now.

Call 911 or go to an emergency department if you or someone with you has any of these:

  • Chest pain or pressureEspecially with breathlessness, sweating or pain in the arm, jaw or back. It can be a heart attack.
  • Face drooping, arm weakness, slurred speechSigns of a stroke. Note the time they started: treatment works best within hours.
  • Severe trouble breathingIncluding a severe allergic reaction with swelling of the lips, tongue or throat.
  • Thoughts of suicideCall or text 988 (Suicide & Crisis Lifeline, US) any time, day or night.

Outside the US, call your local emergency number.

See a doctor within days

  1. 01A new lump, or a sore that does not healMost lumps are harmless, but anything that grows or lasts more than a few weeks should be checked.
  2. 02Unexplained weight loss or lasting fatigueLosing weight without trying, or tiredness that does not lift, can have many causes worth finding.
  3. 03A new medicine and new symptomsSide effects and interactions are common. Ask your pharmacist or prescriber before you stop anything.

General guidance only. If you are unsure how urgent a symptom is, call your doctor or a nurse advice line.